2-part PUR adhesive

COSMO® PU-200.280

***COSMOFEN DUO

This high-strength 2-part adhesive in the practical twin cartridge with static mixing tube achieves constructional force-locked connections with an excellent heat and weather resistance. Because of its wide adhesion spectrum, this adhesive can be used for a lot of different application fields, e.g. for Aluminium window and door manufacturing for bonding of corner connectors, in the dry construction for the friction-locked joint bonding of gypsum fibre boards and granulate cement plates and can be applied for joints with a width between ≥3mm and ≤8mm.

SPECIAL CHARACTERISTICS

• wide adhesion spectrum to different building materials
• high bonding strength
• controlled hardening up
• large gap bridging
• easy handling thanks application by means of the twin cartridge with static mixing tube
• long processing time
• thixotropic, does not drip
• good weather resistance
• solvent-free
• suitable for the injection procedure in the window manufacturing
• can be painted after the hardening up
• later powder-coating possible

APPLICATION EXAMPLES

• bonding of aluminium corner angles into anodised or powder-coated cover- and wing frame profiles for the aluminium window-, door- and façade manufacturing
• joint bonding of gypsum fibre boards
• bonding of different material surfaces, e.g. wood, laminate, glass fibre reinforced plates GRP/GFK (smoothened) and aluminium.
• GRP/GFK-sandwich superstructures in the vehicle construction
• filling of assembly joints of up to 8 mm width
• restoration of damaged joints

TEST REPORTS

Corner angle bonding in the aluminium window manufacturing

Tested by the ift-Rosenheim (institute for window technique), test report no. 50924109/1 „Examination of the resistance to tensile strength of bonded frame corners of aluminium-compound profiles at different temperatures and after diverse conditions of storage“.