Do you have questions?
Our Consultants:
Hans-Jürgen Sieber
Tel.: +49 (0) 2773/815-274 - Email
Protect your structures in contact with the ground, such as basements, plinths, floor-to-ceiling windows, doors, foundations, and floor slabs, reliably and permanently. Our COSMO® HD-120.150 waterproofing solution provides effective protection against:
+ Ground moisture,
+ Non-pressing and pressing water (depending on the load case),
+ and is suitable for interior and exterior waterproofing
Free from solvents and bitumen
Certified with building inspectorate test certificates for joint seals and liquid plastics.
Quick and uncomplicated application
Long-lasting protection thanks to innovative hybrid technology
+ Solvent- and bitumen-free
+ Crack bridging up to 5mm
+ Can be rolled, painted, and filled
+ Fast re-coatability (2nd coating)
+ Suitable for horizontal and vertical surfaces
+ Good processing viscosity
+ Thixotropic, does not drip off
+ Good adhesion – also on slightly damp surfaces
+ Resistant to natural concrete-aggressive groundwater
General building authority test certificates for joint sealing in components, including those made of concrete with high water penetration resistance in areas that are in contact with the soil Part 1, sealing for working joints, intended crack cross-sections, transitions and connections (PG-FBB) Test principles for issuing general building inspectorate test certificates for liquid plastics for structural waterproofing (PG-FLK).
* classified in the EMICODE class EC 1PLUS
Technical Data
Basis
1-C-STP
Colour
grey
Skinning time
approx. 25 minutes
Shore hardness
approx. 36 A
Consumption
≥ 1,15kg/m² per mm layer
Application
Dry layer thickness (2 coatings with fleece), depending on load case, each > 1.0 mm
Do you have questions?
Our Consultants:
Hans-Jürgen Sieber
Tel.: +49 (0) 2773/815-274 - Email