Adhesive sealing mass for vapour barriers

COSMO® DS-410.110

***COSMOPLAST DSK 266
 
COSMO® DS-410.110 has been especially developed for the airtight bonding of vapour barriers/vapour brakes and achieves airproofness values which even withstand hurricane force in the test cycle of pressure and suction.

The Fraunhofer institute for building physics (IBP) in Stuttgart has successfully tested the airproofness of vapour barriers/steam brakes bonded with COSMO® DS-410.110 according to DIN 18055, DIN EN 42 and DIN EN 77. The use
of this adhesive sealing compound easily avoids energy loss and the appearance of expensive structural damage - assuredly.

SPECIAL CHARACTERISTICS

• permanently elastic self-adherent adhesive joint
• thixotropic, does not drop off
• freeze-resistant
• fast functional strength
• Can be used without contact pressure lath in accordance with DIN 4108-7 (2011-01) for joints and connections with new building and refurbishment measures.
• It meets the requirements as per DIN 4108-11
• Excellent adhesion to the most varying building materials (stone, concrete, plaster, floor screed, dry lining boards, wood and diverse metals) as well as to the films in question
• Achieves the required air-tight connections/final sealings of building envelops
• Bonding of films, window joint tapes, on slightly humid, dusty and absorbent substrates
• Accelerated curing behaviour on non-absorbent substrates
• Bonding on non-absorbent substrates using the contact bonding method.
• high adhesive strength after complete curing time
• no corrosion caused on metals
• Since Nov. 2004 protected by patent

APPLICATION EXAMPLES

• For permanently elastic, airtight bonding of joints, structural connections and overlaps, sealing of diffusion barriers, vapour-proof barriers and sealing films in dry construction (except swimming pools) in accordance with the Buildings Energy Act (GEG).
• Bonding/Sealing of diffusion-tight and moisture diffusing seal tapes with window and door assembly

CERTIFICATS / TEST REPORTS

Eurofins Danmark
No negative impact on living room climate
Test report No.: 209681/08

IBP Stuttgart
Air tightness of vapour barriers / checks as per DIN 18055, DIN EN 42 and DIN EN 77 bonded in compliance with DIN 4108-7
(2001-8); cyclic load in compression and tension: 600 Pa (approx. 140 km/h wind speed) and 1,000 Pa ( approx. hurricane
strength)
Test report No.: P6-291B/2003 and Test report No. P17-022/2008.

French VOC-Emission class A+